Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Ted Pella Inc SAPPHIRE SUBSTRATE DISC
Sapphire Substrate Disc, �25.4mm x 0.5mm (�1" x 0.020"), polished. The PELCO� Sapphire Discs or wafers are made from high purity clear sapphire (Al2O3), ground and optically clear polished on both sides. (Technical Data for Sapphire). Sapphire has a wide transmission range; from 150 to 6000nm with low absorbance in the 300 to 4500nm range. The discs are ideal as substrates for thin film research and are suitable for optical research. Excellent resistance against a wide range of chemicals. Surface polish to one microinch or better on each face. Tolerances are �0.001" (0.025mm) in diameter and thickness; flatness to 0.0003" (0.0008mm) or better.
Bulbman Inc Eiko 1460 Bulb 6.5V 2.75A S8 Incandescent Bulb
This Eiko 40279 is a ANSI code 1460 bulb. It uses 18 watts and 6.5 volts. It has a P30D base, and an average rated life of 100 hours. It has a S8 lamp shape, and is an incandescent bulb.
Med Vet International Jorvet 50cc Nylon Syringe, J0111DN
Virtually unbreakable nylon with transparent barrel, economically priced with easy-to-read black etched dose markings. Combination of luer lock and luer slip adaptor.NY, CT, IL, NJ, NH, DE and MN restrict the sale of syringes and needles to licensed professionals and entities. By proceeding to purchase through our website, you acknowledge that you are over 18 years of age.
Electron Microscopy Sciences Gilder Thin Bar Square 400 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 62 µm
Hole: 54 µm
Bar: 8 µm
:
Electron Microscopy Sciences Gilder Thin Bar Square 1000 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 25 µm
Hole: 19 µm
Bar: 6 µm
:
Electron Microscopy Sciences PS8 Micrometer Standard with UKAS Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A UKAS accredited laboratory carries out measurements at selected points on the scales and grids and issues a calibration certificate.
Electron Microscopy Sciences PS5 Micrometer Standard with Graticules Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A Certificate of Comparison from Pyser-SGI, Graticules Division compares the scale to a NPL calibrated in-house standards. A statemen is provided on the accuracy of the item with respect to these standards.
Electron Microscopy Sciences Cargille Microscope Type 37 Immersion Oil 4 OZ
Cargille PCB-Free Immersion oils were introduced in 1972. Today, no other immersion oil meets FDA criteria. Cargille 37 Immersion Oils have an index of 1.515 at 37 deg C. Consideration of these oils is also suggested where stage temperatures are elevated by sub-stage illuminators and high wattage projection equipment.
Density: @ 23°C: 0.917 g/cc
Electron Microscopy Sciences Indexed Grid Microscope Graticle NE35, 21mm, 1 mm indexed squares
Useful for area of specimen determinations, especially rectangular shapes, also for particle counting.
Size: 21mm
Divisions: 1 mm indexed squares
Surface: Chrome image
Electron Microscopy Sciences JEOL SEM Cylinder Mount 2" surface, 1/4" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 2"
Height: 1/4"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 3/8"